Description |
Sensor type |
continuous rotation potentiometric wind direction vane |
Applications |
• wind resource assessment • meteorological studies • environmental monitoring |
Sensor range |
360¡Æ mechanical, continuous rotation |
Instrument compatibility |
all NRG loggers |
Output signal |
Signal type |
Analog DC voltage from conductive plastic potentiometer, 10K ohms |
Transfer function |
Output signal is a ratiometric voltage |
Accuracy |
potentiometer linearity within 1% |
Dead band |
8¡Æ Maximum, 4¡Æ Typical |
Output signal range |
0 V to excitation voltage (excluding deadband) |
Power requirements |
Supply voltage |
Regulated potentiometer excitation of 1 V to 15 V DC |
Response characteristics |
Threshold |
1 m/s (2.2 miles per hour) |
Installation |
Mounting |
onto a 13 mm (0.5 inch) diameter mast with cotter pin and set Installation screw |
Tools required |
0.25 inch nut driver, petroleum jelly, electrical tape |
Environmental |
Operating temperature range |
-55 ¡ÆC to 60 ¡ÆC (-67 ¡ÆF to 140 ¡ÆF) |
Operating humidity range |
0 to 100% RH |
Lifespan |
50 million revolutions (2-6 years normal operation) |
Physical |
Connections |
4-40 brass hex nut/post terminals |
Weight |
0.14 kg (0.3 pounds) |
Dimensions |
• 21 cm (8.3 inches) length x 12 cm (4.3 inches) height • 27 cm (10.5 inches) swept diameter |
Materials |
Body |
black UV stabilized static-dissipating plastic |
Shaft |
stainless steel |
Bearing |
stainless steel |
Wing |
black UV stabilized injection molded plastic |
Boot |
protective PVC sensor terminal boot included |
Terminals |
brass |