óÀ½À¸·Î À̸ÞÀÏ »çÀÌÆ®¸Ê
¿Â¶óÀι®ÀÇ
¿Â¶óÀÎÁö¸í¿ø
 
    Á¦Ç°¼Ò°³    Symphonie NRG Logger
Symphonie NRG
Logger
 
 
The revolutionary Symphonie data logger gives you all the accuracy and durability of other NRG loggers but allows you to
collect data without ever leaving your desk.
Symphonie works with a standard data card or with any NRG manufactured iPack that sends data reports to your internet
provider over an embedded standard, cellular or satellite phone.
You get an email with an attached data file at any interval you choose.
Symphonie has been engineered to be simple to set up and use. Three anemometer and two wind direction channels are
built in, and plug-in Signal Conditioning Modules that are pre-configured to work with sensors from NRG or other manu-
facturers may be installed for additional sensors. The Symphonie logger stores over a year¡¯s worth of data on non-volatile
Multi-Media Cards (MMC). iPacks are ¡°plug and play¡± with battery, modem and phone already installed.
A real-time display and keypad are built into the logger to facilitate set-up and site visits.
Symphonie directly interfaces with your choice of communication iPacks to transfer data to your local Internet Service
Provider (ISP). With an added communication iPack (AMPS Analog, GSM, CDMA, DoCoMo, satellite or Dial-up), it is not
necessary to make a site visit to change the MMC Card.
As with all products from NRG, the Symphonie system is rugged, straightforward, and allows for a wide variety of customized
preferences for sensor inputs and data processing to meet your individual needs and specifications.

FEATURES
• Wind energy specific and pre-configured to industry standards. All features for wind energy assessment built in.
  No complexconfiguration.
• Easy to install. Convenient ¡°plug and play¡± Signal Conditioning Modules (SCM) for additional sensor inputs.
  Preconfigured for sensor type.
• Voice call feature allows on-site programming and testing of iPack communications.
• Antenna test feature allows verification of phone signal strength.
• Uses non-volatile Multi-Media FLASH cards.
  Cards are available almost anywhere in the world and are safer for data storage than RAM memory cards.
• Average, Standard Deviation, Maximum and Minimum values for all sensor channels at every 10 minute interval.
  Set-up is done for you.
• Free Symphonie Data Retriever software is included and produces versatile, tab-delimited text files.
  Data files can be used with wide range of data processing software, including SQL databases, MS Excel, MS
  Access, and more. Supports international numeric formats.
• Easy to read 4 line x 20 character display provides easy to understand real-time data and configuration information.
• Dedicated navigation buttons (up, down, left, right, home), plus a data entry keypad.
  Full-text, menu-driven display is easy to use.
• Separate lithium battery-backed real-time clock for accurate and reliable time stamping.
• Runs on two standard alkaline D-cells (included) for up to one year, depending on sensor configuration.
• Rugged, non-corroding, weatherproof polycarbonate enclosure.
• Optional iPacks provide solar/battery power and automatic remote data download capabilities via email.
  Support for AMPS cellular, GSM cellular, CDMA cellular, DoCoMo cellular, satellite and dialup phone lines.

SPECIFICATIONS

Description Instrument type 12 channel internet-enabled micropower wind energy data logger
Applications • wind resource assessment
• turbine power performance verification
Sensor compatibility -
counter channels
• NRG #40 anemometer
• rain gauge
• opto anemometer
• reed switch anemometer
Sensor compatibility -
analog channels
• NRG 200P direction vane
• NRG 110S temperature
• Li-Cor 200SA pyranometer
• NRG BP-20 absolute pressure (requires optional iPack power)
• RH-5 relative humidity (requires optional iPack power)
Data
Collection
Counter channels Channels 1 - 6 are always counter inputs:
• channels 1 - 3 dedicated for NRG #40 anemometer or compatible
• channels 4 - 6 use counter Signal Conditioning Modules (SCMs) to
  configure the channel for a particular sensor
Analog channels Channels 7 - 12 are always analog inputs:
• channels 7 and 8 dedicated for NRG 200P (potentiometer) direction
  vane
• channels 9 - 12 use analog Signal Conditioning Modules (SCMs) to
  configure each channel for a particular sensor
Sampling interval 2 seconds
Averaging interval 10 minute fixed
Real time clock internal battery-backed with leap year correction, Y2K to 2099
Storage medium 16 MB MultiMedia Card (MMC), non-volatile FLASH
Maximum data storage 664 days
Parameters recorded
for each channel
• each data interval is time-stamped
• average
• standard deviation
• min
• max
File format • Windows compatible
• (1) 14 KB binary file per day
• header includes site, serial number and sensor information
Software Symphonie Data Retriever for Windows (included)
• scales raw data
• creates measurement database for each site
• creates basic reports
• maintains site and sensor information
• configures iPacks
Reader Windows compatible MMC reader accesses data stored on MMC as
disk files
Data delivery • MMC cards
• internet email via GSM, AMPS or dial-up with optional iPack
Resolution Analog measurement
resolution
0.1% of full scale (1024 counts)
Counter average
stored resolution
0.1% of the value stored
Analog average
stored resolution
0.1% of the value stored
Min / Max stored
resolution
0.3% of the value stored
Standard deviation
stored resolution
4% of the value stored
Configuration User interface • Liquid Crystal Display (LCD) 4 x 20 characters
• 16 key pad (6 navigation keys plus numeric/phone pad) with audible
  feedback
Configurable
parameters
• clock
• time zone
• site number
• display scaling
  (defaults are provided for each channel based on channel type)
iPack options • iPack configured via serial port connection to your PC
• serial connection direct to iPack or through logger's iPack access port
• Symphonie Data Retriever for Windows integrates iPack settings
Connections Sensor wiring • sensors connect to field wiring panel
• field wiring panel plugs into logger
• ground stud to connect to earth ground
• male DB25 interfaces to one optional iPack communications module
• iPack access port facilitates field programming and accepts headset
  for voice calls
• 3 SCM slots for counter SCMs
• 4 SCM slots for analog SCMs
Power
requirements
Batteries (2) 1.5 Volt D-Cell Batteries (included)
• nominal voltage: 1.5 Volts
• minimum voltage: 0.9 Volts
• battery life approximately one year, depending on configuration
External power input provided by any iPack
External solar input provided by any iPack
Other optional iPacks provide 12V power required by some sensors.
PV/Battery only iPack provides power to sensors and logger for stand
alone configurations.
Installation Mounting • mounts with 4 bolts (included) to keyed slots inside of metal shelter box
• shelter box attaches to tower with hose clamps
Tools required • screwdriver for input terminals, included
• 8 mm (5/16 inch) wrench or nut driver for logger mounting screws
• 3/8 inch wrench or nut driver for logger ground nuts

 
°ü¸®Àڷα×ÀÎ